GOTT GOTT-ETHERNET-900 Ethernet System Trainer

  • Manufacturer: GOTT
    Model: GOTT-ETHERNET-900
    P/N: 1086-620
    Origin: Malaysia
    Guarantee: 12 month
    • Request a Quotation Request a Quotation
  • Contact
  •  Call for best price

    Hotline: (+84) 867820758

    Phone+84 (24)62923267


Operation Conditions: 0 TO 45C,85% or Less (R.H.) 

Input Power: AC 220V, 50/60Hz 1-Phase


• System data Ethernet TCP/IP 

• Number of I/O modules only limited by IP addresses 

• Number of I/O points depending on controller 

• Data transfer medium 4 x 2 twisted pair copper cable

• Category 5 (100 Mbaud) 

• Cable length 100 m between hub/switch and Bus Coupler 

• Data transfer rate 10/100 Mbaud 

• Topology star wiring


Thought and action in network systems

It is becoming more and more common for specialists and engineers to be responsible for operation and maintenance of complex automated production systems. This requires the seamless interaction of all the technologies involved. GOTT-FMS-1A forms the basis for general technological training using practical problems from actual operational applications. It provides the perfect platform for analyzing, understanding and mastering the interaction of mechanics, pneumatics, engineering, control technology and communication interfaces – all absolutely critical for proper and successful management of networked systems. 

Besides the MAIN PANEL, there are 5 other stations, such as: 

1. Distribution Station 

2. Testing & Incpection Station 

3. Handling & Assembly Station 

4. Processing & Analyze Station 

5. Sorting Station & Positioning Control


Network system operation – communication is key 

GOTT-ETHERNET-900 systems are of modular design, with the modules or subsystems featuring powerful communication interfaces, such as the I/O coupling and Ethernet similar to those used in typical practical applications.

The control concept 

Each station is equipped with its own controls. The only exception to this is the motion positioning station; in this case the servo controller also controls the position & communicates with the transport system via I/Os. Communication between the transport system & the GOTT-ETHERNET-900 of the stations also takes place via a straightforward I/O interface. This simple and clear structure is facilitates quick and easy combination of the individual stations into a networked system.

Main control station specification 

• Master computer with IP identification address 

• 15" touch panel LCD screen 

• TwinCat license software ready 

• Windows OS pre-install 

• Base 10/100 16 point Ethernet terminal Network Switch 

• Network connection enable 

• Wireless communication access

Sub station 1 ~ 3 specification 

• Self operating system computer with network ready 

• Individual IP configuration identification address 

• TwinCat license software ready 

• Windows OS pre-install 

• Network connection enable

Sub station 4 

• Self operating system computer with network ready 

• Individual IP configuration identification address 

• TwinCat license software ready 

• Windows OS pre-install 

• Serial connection Barcode scanner 

• Network connection enable

Sub station 5 

• Self operating system computer with network ready 

• Individual IP configuration identification address 

• TwinCat license software ready 

• Windows OS pre-install 

• Serial connection Servo controller 

• Network connection enable

Working station consist learning of : 

• Object identification 

• Valve terminal technology

 • Networking technology 

• HMI interface technology 

• GOTT-ETHERNET-900 controller 

• AC Servo drive system 


• I/O port for station 

• Positioning controller 

• Gripper for work pieces 

• Control panel set-up 

• Interface to the conveyor system

 • Multi user access via TCP/IP Ethernet 

• Overall Dimensions : 3000 x 500 mm

Optional Item: 

• Barcode Scanner 

• PC#1 to PC#5 in not included in this trainer


(1) All manuals are written in English. 

(2) Model Answer 

(3) Teaching Manuals




The GOTT-ETHERNET-900 Bus Coupler connects Ethernet with the modular, extendable electronic terminal blocks. One unit consists of one Bus Coupler, any number from 1 to 64 terminals and one end terminal. The Bus Couplers recognize the terminals to which they are connected, and perform the assignment of the inputs and outputs to the words of the process image automatically. 

The GOTT-ETHERNET-900 Bus Coupler supports 10 Mbit/s and 100 Mbit/s Ethernet. Connection is through normal RJ 45 connectors. The IP address is set on the DIP switch (offset to a freely selectable start address). In networks with DHCP (a service for the allocation of the logical IP address to the physical node address (MAC-ID) the Bus Coupler obtains its IP address from the DHCP server. 

Supports ADS TwinCAT system communication. TwinCAT I/O makes available configuration tools and Windows NT/2000/XP drivers for programs in any desired high-level language (DLLs) and for Visual Basic applications (ActiveX). Applications with OPC interfaces can access ADS via an OPC server, a simple master/slave protocol based on TCP/IP in wide application. 

Optionally, the Bus Terminals can also be controlled by the control system. Via function blocks (FBs), the programmable logic controller (PLC) or the PC or IPC handles configuration of the complete periphery during the start up phase. The controller carries out the desired setting automatically after switching on.

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information