Ion generation method: DC corona discharge
Discharging electrode needle: Tungsten
Ion balance*: Within ±10V (at time of factory shipment), permits fine tuning
Fan speed: Variable (non-step)
Maximum air volume: 3.68m3/min
Airflow speed*: 1.3 - 4.6m/sec
Cleaning brush: Yes
Alarm display: Cleaning, fan failure, fan guard removal, high-voltage stop
Terminal block: DC24V input, DC24V output (permits series connection of up to five units)
Cleaning alarm (including high-voltage alarm), buzzer output (DC24V)
Fan failure alarm (including fan guard removal), ground
Amount of ozone production*: 0.02 ppm or less
Operating environment: Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition: DC24V
Consumption current: 550mA
Mass: Approx. 910g
Ultra-fast ionization at twice the speed of conventional units
This unit boasts superior ionization performance nearly twice that of conventional ionizers, which is enabled through the use of twice as many discharging electrode needles as conventional units (eight instead of four) and a high air-capacity fan.
KD-750B ionization performance
Wide ionization area
The original fan guard enables the widest-ever ionization area. When installed as in the diagram below, for instance, ionization can be performed from three IC trays.
KD-750B ionization performance (overhead installation)
Ultra small dimensions and antistatic design
The fan comes in the smallest size for a 120 x 120 unit, allowing the ionizer to be installed on a bench or in a manufacturing device while requiring little space.
The stainless steel fan guard is capable of shielding the electric field, while use of an antistatic resin for the body permits installation in an EPA (ESD protected area).
A stain-resistant ionizer ensuring stable operation over a long period and reduced maintenance
Use of twice as many discharging electrode needles as conventional units and high efficiency ion generation reduce performance degradation, enabling stable, long-term operation. This results in a significant reduction in the frequency of maintenance.
Temporal change of ionization performance
The KD-750BB comes equipped with a cleaning brush that allows easy cleaning of the discharging electrode needles simply by turning the front knob. This significantly reduces maintenance.
The addition of the cleaning brush in no way affects the unit’s ionization performance, ensuring that it eliminates static as quickly as previous versions.
The cleaning brush is compatible with the KD-750B’s fan guard. KD-750B currently in use can be easily equipped with the cleaning brush.
Intuitive display panel
The front display panel allows easy confirmation of the ionizer’s operating status. The unit is equipped with a lamp that signals when cleaning is needed. This lamp was featured in previous models and well received by users. Moreover, the unit also has a fan monitor lamp that informs of fan failure.
Input and output terminals
The terminal block on the rear side allows easy connections for power input and output and alarm output. This means that the ionizer can be easily interlocked with all types of manufacturing devices, so that signals indicating performance degradation due to poor maintenance or loss of ionization effect from fan failure are immediately transmitted to the device in which the ionizer is used.
Ionization from microelectronic devices
The unique design ensures the widest possible variable range of air volume, which permits the fastest-ever ionization from microelectronic devices at an extremely weak airflow.
Ionization performance at different air volumes (*Measurement distance: 300 mm)
|Air volume||Time taken for ionization|
|Maximum (4.6 m/sec)||0.6sec|
|Minimum (1.3 m/sec)||1.8sec|
Main unit of the ionizer
|Ion generation method||DC corona discharge|
|Discharging electrode needle||Tungsten|
|Ion balance*||Within ±10V (at time of factory shipment), permits fine tuning|
|Fan speed||Variable (non-step)|
|Maximum air volume||3.68m3/min|
|Airflow speed*||1.3 - 4.6m/sec|
|Alarm display||Cleaning, fan failure, fan guard removal, high-voltage stop|
|Terminal block||DC24V input, DC24V output (permits series connection of up to five units)|
|Cleaning alarm (including high-voltage alarm), buzzer output (DC24V)|
|Fan failure alarm (including fan guard removal), ground|
|Amount of ozone production*||0.02 ppm or less|
|Operating environment||Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)|
|Mass||Approx. 910g||Approx. 900g|
*Measurement distance: 300mm
Dedicated AC adapter
|Input conditions||AC100 - 240V 50/60Hz|
|Capacity||Capable of driving one unit of KD-750B|
Rear fan guard unit with filter
Replacement filters (five filters)
Note: Please use the following symbols when placing an order for KD-750BB/KD-750B.
Dimensions [mm] and names of parts
Main unit of the ionizer
Dedicated AC adapter : KN-AC1(Options)
- Manufacturing and assembly processes of electronic devices
- High-speed static elimination in various manufacturing devices
- Prevention of dust adhesion to optical components
- Ionization from a long distance
- Quality Engagement
- Easy change and return
- Delivery Avaliable
- Favorable payment