SIGMA SG-5822B 오디오 / 사운드 분석기- 모델

  • 생산업체: SIGMA
    Model: SG-5822B
    출처: Korea
    보증: 12 month
    • 견적요구 견적요구
  • 연락처
  •  할인 받으려면 전화하십시오

    핫라인: (+84) 969950220

    전화번호+84 (24) 62923267

- Generator & Analyzer: 

Level flatness of the combined generator & analyzer

100 Hz ~ 10kHz: <± 0.1 dB

20 Hz ~ 20 kHz: <± 0.2 dB

20 Hz ~ 80 kHz: <± 0.2 dB

- Sweep Generator: 

Number of channels: 2 channels with individual levels

Sampling rate (fs) / Level resolution: 192 kHz / 32bit DAC

Frequency range: 20 Hz ~ 80 kHz

Level range (balanced): 10mVRMS to 28VRMS

Level setting resolution: 10mV

Amplitude shape dynamic range: 94 dB

Level accuracy @ 1 kHz: <± 0.1 dB

Level flatness: 

100 Hz ~ 10 kHz: <± 0.1 dB

20 Hz ~ 20 kHz: <± 0.2 dB

20 Hz ~ 80 kHz: <± 0.2 dB

Frequency resolution: 

 Log: 1/1,1/3,1/6,1/12,1/24,1/48 Octave steps

 Lin: 1 to 2000 steps

 Chirp

 EQ voltage

Frequency accuracy: <± 50 ppm

- Sweep Analyzer: 

Number of channels: 2 independent channels

Sampling rate (fs) / Level resolution: 192 kHz / 32 bit

Bandwidth: 20 Hz ~ 80 kHz

Level range: -34 to + 60 dBVp

Level accuracy @ 1 kHz: <± 0.1 dB

Level flatness: 

100 Hz ~ 10 kHz: <± 0.1 dB

20 Hz ~ 20 kHz: <± 0.2 dB

20 Hz ~ 80 kHz: <± 0.2 dB

Residual distortion @ level +25 to –20 dBVp (THD+N)

Residual noise: <-120 dB

Phase accuracy (interchannel): ± 1 deg @ 200 Hz ~ 4 kHz

Internal frequency accuracy: ± 50 ppm

Selectable input impedance per channel: 1 MΩ

Input impedance accuracy: 1% of resistor value

Input impedance coupling: AC Coupled

CCP voltage: 24 VDC

CCP voltage accuracy: ± 1 VDC

CCP inward resistance: 2.2 KΩ

Measurements:

 [1] SPL (Sound Pressure Level) Frequency Response

 [2] Total Harmonic Distortion / 2nd & 3rd Harmonisc Distortion

 [3] Extraneous Noise (Rub&Buzz) Frequency Response

 [4] Impedance Frequency Response

 [5] Polarity (Phase Frequency Response)

 [6] Impedance

 [7] Fo, Ze (Resonance Frequency)

 [8] L/R Comparison measurement

Option & Accessories:

CCP power voltage: Connector type BNC 24 VDC, 48 VDC

Polarization Voltage: Connector type 7 pin Lemo 200 VDC

SP-72: Lemo ICP Adaptor

SG-5001B:

 Remote Control

 15P D-Type connector I/O signal - Start, Pass, Fail, Fail [Class1, Class2, Class3, Class4]

 SPL Analyzer ON. Rub & Buzz Analyzer ON .

 Remote control I/O ※ Terminal Box [Option 01A]

- Bluetooth Input/Output Module Specifications: 

Bluetooth Core Versione: 3.0 Compliant

Profiles/Roles Support:

 A2DP Source

 A2DP Sink

 HFP Audio Gateway

 HFP Hands-Free

 HSP Audio Gateway

 HSP Headset

 AVRCP Controller

Codecs Supported: 

 SBC

 APT-X

 CVSD

 mSBC

RF Connection: Type N, Female Antenna

RF Input Impedance: Typically 50 Ω

RF Output Impedance: Typically 50 Ω

RF Power: Typically 0 dBM; Typical maximum +6.5dBM

RF Sensitivity (0.1% BER): Typically -83dBM

- General: 

Standard software: 

 Audio Analyzer Production software

 (PC based Windows® XP, Vista, win7 )

 Pentium®4, 1.5GHz processor minimum or equivalent.

 (Celeron processors are not recommended)

Interface Bus: Personal computer connected to the instrument through the Audio Analyzer Interface Bus. (USB2.0)

Main power requirements: AC 220-230V~ 50/60Hz 40VA

Fuse: 5 x 20 T LBC 630mA/250V Standard : EN10480

Operating temperature: + 5 to +45℃ ( +40 to +110 F ), R.H.<90% non condensing

Dimensions: 485(W) * 95(H) * 256(D) mm (without Dimensions of Power Amp)

Weight: 3.4 kg (without Weight of Power Amp)



  • 품질 보증
  • 공인 보증
  • 집으로 배달
  • 간단하게 거래하기

할인과 정보를 받기 위해 등록하기