M&MPRO LMLX1010BS 照度计

  • 制造商: M&MPRO
    Model: LMLX1010B
    • 报价要求 报价要求
  • 联系
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      



Specifications

Display:

Range:

 

 

Minimum value:

Accuracy:

 

    

Temperature characteristics:

Measuring speed:

Photo detector:

 

Temperature / humidity for

Temperature / humidity storage:

    
Input limit:

 

Size:

 

 

Weight:

Voltage:

     
Accessories:

 


3 1 / 2 digits LCD display, showing a maximum value 1-100000 Lux 1999. (3 Ranges)

20.000 Lux range: reading X 10

100,000 Lux range: reading X 100

1 Lux

≤ 10.000 Lux: ± 4% rdg ± 0.5 f.s

≥ 10.000 Lux: ± 5 + 10 digits (for calibration standard incandescent light at 2856K color temperature)

± 2%

± 0.1% / oC

0.2 times / sec.

 

0 ° C to 40 ° C (32 ° 104 ° p-p) 0-70% Rh

-10 ° C to 50 ° C (14 ° 122 ° p-p) 0-80% Rh

The use of "1" (2.000 Lux/20, 000 Lux)

Display "OVER" (100,000 Lux)

 

106X57X26mm (detect image)

230 X 72 X 30mm (meter body)

150 cm (picture detecting lead)

190g

A PIN 9 V,



Origin: American Technology
Warranty: 12 Months

 

Details


• accurate and easily read.
• High Accuracy.
• LSI circuit use provides high reliability and durability.
• Allows a wide range of light measurement.
• Press the PIN key.
• Automatic adjustment of 0.
• LCD display helps lower power consumption.
• Compact, lightweight, and intelligent operation.
• LCD display can clearly read even when a high intensity light.
• light sensor allows the user to perform measurements in the optimal position.

Power consumption ~ .2 mA, user manual, battery, carrying case

Operational guidelines
1. Insert the PIN, and then press the button to open the "ON".
2. Press the range switch to select the desired range.
3. Remove the photo detector and face it to the light source in a horizontal position.
4. Read and check the values ​​from the LCD screen.
5. In scope: if the machine only shows a "1" in the MSD, the input signal is too strong and the higher range is selected.
6. To keep the data, press the "HOLD" stop the clock all the measurements and check the value stored on the LCD screen. when you press the "ON", the value of holding will be destroyed.
7. When measurement is complete, close the cover photo detector and shutdown using the "OFF"

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会