Use a multimeter to test a light switch?
If the light bulb in your house suddenly doesn't light up or comes on sometimes, it will affect your daily life. First, check if the light bulbs are working well and do not tighten them because they often become loose over time. It is also important to check that the circuit has power and has not had a tripped circuit breaker or blown fuse.
Contents
If it's not the above reasons, you most likely have a problem with the switch, typically if the switch is old or feels loose. One sure way to check if a light switch is broken is to use a multimeter, which is both safe and gives accurate results. The article below will show you how to check a light switch with a multimeter in the simplest way!
Some basic tools to test light switches
Testing light switches can be easier than you think when you know how to use a few basic tools. First, a screwdriver is what you need, usually a flathead and phillips type, to remove the switch and disconnect the wires. Don't forget to prepare a non-contact voltage tester to ensure safety before you touch switches and wires. Finally, to perform the test, you will need a continuity tester or multimeter.
A continuity tester is a simple electrical device with a metal probe, a test light, and a wire with a clip on one end. This device helps check whether the circuit is complete or not. If the circuit is "open" it means there is no continuity, but if the circuit is "closed" there will be continuity. When the light switch is turned on, the circuit is closed and has continuity; when the switch is turned off, the circuit is open and has no continuity. If the switch is damaged, it will not close the circuit, resulting in no continuity.
A multimeter is a multi-function measuring device that can measure voltage, current, and resistance. It can also perform simple continuity testing. To set up the multimeter to test for continuity, turn the test knob to the Continuity or Ohms setting.
Steps to use a multimeter to test a light switch
Step 1: Turn off the power
Before testing the light switch, turn off the power by turning off the circuit breaker. If you don't have a breaker box, remove the fuse from the electrical panel.
Step 2: Check voltage
Remove the screws on the switch cover to reveal the wires inside. Don't touch any of the wires, but test them with a non-contact voltage tester. Also, check each terminal on the switch.
If voltage is detected, return to the control panel and turn off the correct breaker, then retest until there is no more voltage.
Step 3: Test the switch with a multimeter
Place the switch in the off position and check the connections. Use the probe of the multimeter to touch one of the screw terminals and toggle the switch. When the switch is on, the meter should display 0, and when off it should display 1, meaning there is no continuity.
Step 4: Reconnect or replace the switch
Reconnect the switch to the circuit wires, tightening each screw head. If the switch is damaged, replace it with a new switch with the same voltage and amperage rating as the original.
Step 5: Complete the job
Push the switch back into place, tuck the wires neatly into the box and secure with screws. Turn the power back on and check that the light switch is working properly.
Suggest a few multimeter models to test light switches
A multimeter helps you check home devices such as sockets or switches when light bulbs flicker. One of the best options for this repair is a digital multimeter.
This is a modern device manufactured by Hioki - a famous brand from Japan. This device is capable of measuring DC voltage and AC voltage with high accuracy. In addition, it can also measure continuity and resistance.
With a compact, thin and light design, Hioki 3244-60 is easy to move and use, ensuring high safety and user friendliness.
Kyoritsu 1018H multimeter
Kyoritsu 1018H is one of the multimeters that is highly appreciated by both professional and amateur repairmen. Widely used from household repairs to commercial and service applications.
The machine is capable of measuring AC/DC up to 600V, and can measure frequency, resistance, capacitor and diode testing. With a reasonable price, sturdy design, and compact, easy-to-carry size, Kyoritsu 1018H is a choice worth considering.
Kyoritsu 1110 multimeter
Despite the needle indicator design, Kyoritsu 1110 still affirms its value. This device can measure AC voltage up to 600V, test batteries, LED lights and measure temperature.
Kyoritsu 1110 is favored by many electricians and is among the top products to own when needing to repair and check devices such as electrical outlets, switches and household sockets.
Conclude:
Above are shares on how to use a multimeter to check electrical switches. If you have any questions that need answering, please contact us via the website or EMIN fanpage for advice as soon as possible.
